Freighters of the Great Lakes

How much freight could the great lakes freight if the great lakes freighters weren’t late?

If you’ve spent any time on our Great Lakes you’ve no doubt seen one of the largest vessels on ANY body of water: the North American “Laker”, more commonly known as a “freighter.” These giant ships transport cargo across our Great Lakes navigation system from Duluth Minnesota to Ogdensburg, New York- almost 1,600 miles! Given the Great Lakes small footprint compared to the vast oceans our planet has, it’s easy to wonder why any shipping gets done on our fresh water at all, but with 63 commercial ports and almost 200 million tons of cargo moved annually on the lakes, it’s actually a very busy means of shipping.

Great Lakes Shipping Navigation Ports

The Great Lakes shipping season begins in late March and ends in January. During the short off-season, crews take an extended leave and see their families and friends while maintenance is done to the lakers. The ice that freezes over the lakes in those early months makes the lakes impassable which gives a welcome respite from the long days on the water. When the water is open, however, the vessels are usually moving cargo of natural resources including coal, ore, limestone, iron, grain or salt but may also carry things like cement or car parts. Some lakers are over 1,000 feet long to carry HUGE amounts of cargo. While it may seem silly to have such giant vessels on a chain of lakes, these larger lakers are actually much more efficient than smaller vessels. One modern 1,000 laker carries as much cargo as three 600 foot lakers can, all while using less fuel and fewer crew members.

Speaking of efficiency, one modern laker can unload its cargo completely in 6 hours, often with only one person at the controls. The modern vessels also offer extreme fuel efficiency. With 1 gallon of fuel, a laker can move one ton of cargo 607 miles. The next most efficient transportation method is a freight train that can move 1 ton of freight a paltry 492 miles with 1 gallon of fuel. Not too bad considering they have an average open water speed of 15 MPH.

Freighter using its boom to self-unload in the great lakes

A longer-term cost savings comes from the ships themselves. The majority of fresh water cargo ships never see salt water from the oceans which means less deterioration of metal components on the vessels. This means their 40-50 serviceable life is double that of their salt-water, “salties” counterparts. Another point for the Great Lakes! However, what’s stopping freshwater lakers from going into the Atlantic and vice-versa? The St. Lawrence Seaway.

Ships in locks

The St. Lawrence Seaway is a series of locks, canals, and channels that permits ocean-going vessels to enter the Great Lakes and freshwater-going vessels to enter the Atlantic. The seaway uses locks which are only 80 feet wide, meaning that the width (or beam) of a ship passing through them can’t exceed 78 feet. Cutting it close! Because of this narrow width most ocean-going ships can’t make it through. However, our lakers can make it to the atlantic, but usually don’t venture too far as their narrow beam and the larger waves of the ocean make it perilous.

If you want to dive in even deeper, check out the Know Your Boats publication which can be had here: http://www.knowyourships.com/

The publication covers essential data and statistics of hundreds of freights, tugs, barges, and other vessels on our Great Lakes and even offers a chart of each flag and stack for the freighters you may catch while you’re on the water!


Leave a comment

Please note, comments must be approved before they are published

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods